DTF Direct Transfer Film (No Cut) Application for White Light Cotton T-shirt

Here are the instructions for using the DTF Direct Transfer Film:

  1. Load a single sheet into the bypass tray of your printer.
  2. Ensure that you print on the coated side of the film.
  3. Print the image in reverse or mirror mode.
  4. Set the printer’s paper type to Photo Paper Glossy.
  5. After printing, evenly apply DTF powders across the entire printed image.
  6. Shake off excess powder and transfer the image to an oven preheated to 200°F to 230°F for 2-3 minutes.
  7. Once heated, transfer the image onto your garment using a heat press machine set to 340°F to 360°F for 15-25 seconds.

Following these steps will help you achieve optimal results when using ChromaCotton’s DTF Direct Transfer Film.

$19.99$212.99

Related Products